Photon P1 Max All-in-One Bundle

[1] Pre-configured parameters only work with Anycubic Resins.
[2] When used with Anycubic resins, the device automatically identifies the material and sets the optimized heating temperature no manual adjustment needed.
[3] Test results are based on Anycubic's official materials and recommended parameters; actual performance may vary depending on material batches and environmental conditions.
[4] With Anycubic resins, the system auto-detects and applies optimal heating temperatures without manual adjustment, Heating performance is subject to resin vat capacity and ambient temperature, At ≥5°C (41°F) ambient, the vat achieves up to 35°C (95°F). Below this threshold, maximum temperatures may vary.
[5] Requires Air Pure 2.0 accessory.
[6] One-Click Slicing is scheduled for Q2 2026 release.

The Photon P1 Max offers a massive 18.3L full-scale build volume, allowing you to produce large models or maximize batch production in a single print cycle. Combined with its 1.9L thermal-controlled resin vat, it supports models up to 300mm tall while maintaining consistent resin viscosity for higher success rates and improved productivity.

Equipped with a 14-inch 12K screen (11520 × 8640 px) and 24.8 × 24.8 μm square pixels, the P1 Max eliminates jagged edges and visible layer artifacts.

The Photon P1 Max utilizes C7-grade ball screws and linear guide rails, achieving an impressive repeat positioning accuracy of ±0.01 mm. . This robust motion control system provides a rock-solid foundation, ensuring stable operation and print precision.

The Photon P1 Max uses LightTurbo 4.0 technology to deliver highly reliable prints:

-More Light Precision: Aspherical Fresnel Lens:‌ ≤3° collimation accuracy
-More Uniform Light Distribution: Full-screen Rolling Calibration:‌ >92% illumination uniformity (208-point measurement)
-More Stable Light Output: 8mm Copper Cooling System:‌ Minimum light decay, maximum light source lifespan

Factory calibration — Ready to print out of the box
Auto-Leveling Self-Check — Automatically performs bed leveling self-check before printing to ensure optimal platform readiness.
Leveling-Assist — Displays real-time force values at four corners for
fine-tuning.

With dual-network connectivity (Wi-Fi + Ethernet), remote monitoring via the Anycubic App, and compatibility with ultra-viscous 8000cps resins, the Photon P1 Max delivers a seamless, intelligent, and production-ready experience.

A: Order early to secure the Best Price and enjoy exclusive bonuses.

• Pre-Sale Stage 1 (22 Jul – 3 Aug): $1259 & 3 Exclusive Bonuses
• Pre-Sale Stage 2 (4 Aug – 11 Aug): $1339 & 3 Exclusive Bonuses
• Pre-Sale Stage 3 (12 Aug – 31 Aug): $1429 & 3 Exclusive Bonuses
• In-Stock Period (Starting 1 Sep): $1599, with all 3 exclusive free gifts no longer available

A: When purchasing the Photon P1 Max, you can enjoy the following 3 Exclusive Bonuses:

• Up To 50% Off 4KG Resin (*Included in Bundles)
• 50% OFF on Photon P1 Max Related Accessories.
• Buy 2 Units, Get Free 5pcs Release Films
  These exclusive offers are designed to lower both your upfront investment and long-term printing costs.